PARTS FOR AB DICK PAGE 1
CLICK BELOW TO SEE PDF FLYER
Click here for AB Dick PDF Flyer
| AB
DICK 360 QUICK CHANGE BLANKET BARS
$100.00 OFF ONLY 8 SETS LEFT ON EARTH FIRST COME FIRST SERVE SIMPLY MOUNT ON YOUR PRESS ONE TIME!! THEN CHANGE YOUR BLANKET LIKE YOU WOULD CHANGE A PLATE ONLY FOR THE AB DICK 360 |
|
|
CLICK PHOTO TO ENLARGE |
CLICK PHOTO TO ENLARGE |
|
W-QC-360-CLOSEOUT WAS $185.00 NOW ONLY $85.00 |
|
|
Parts for AB Dick 350/360/375/8800/9800/385 |
|||
| WP-1714 THIS OLD PRESS |
THIS OLD PRESS VHS 1) Removing the
covers |
REGULAR PRICE
$105.80
$59.90 ONLY 4 LEFT |
|
| WP-1555-50 | Sucker feet 50 per pack For AB Dick | 20.00 | |
| WP-1555-100 | Sucker feet 100 per pack For AB Dick | 38.00 SAVE $2.00 | |
| WP-1555-500 VALUE PACK | Sucker feet 500 per pack For AB Dick | 150.00 SAVE $50.00 | |
| WP-36303 | NEW STYLE (momentary) Drive motor switch with tab connectors 3 positions for AB Dick | 28.50 | |
| WP-98540 | Control
panel overlay
( 9815 to 9850 Series )
|
$219.90 | |
| WP-98562 | Control
panel overlay
( 9870 )
|
$449.90 | |
| WP-1630 | Variable
Speed pulley
|
89.90 | |
| WP-36990 | Sucker
tube with shut off valve
SPECIAL LOW PRICE TODAY
|
TODAY
ONLY
4.95 STOCK UP NOW |
|
| WP-36951 | Plug
for bleeder valve
|
8.10 | |
| WP-36847 | Bleeder
valve complete |
86.90 | |
| WP-36446 | Idler
gear
|
32.90 | |
| WP-36615 | Hand
Wheel
|
124.90 | |
| WP-36688 | Gap
control dial for AB Dick 350/360/375/385
|
94.90 | |
| WP-98688 | Gap
control dial for AB Dick 8800/9800
|
94.90 | |
| WP-98053 | Flexible speed
control shaft
|
94.90 | |
| WP-36969 | Table
release lever350/360/375/385
|
99.90 | |
| WP-37969 | Table
release lever 9800 Series
|
109.90 | |
| WP-36374 | Complete Super Aquamatic Kit 350/360 with parts | 669.39 | |
| WP-37374 | Complete Super Aquamatic Kit 375/9800 with parts | 769.90 | |
| WP-36974 | Table
raise gear
|
129.90 | |
| WP-98955 | Feeder
Crank assembly 9800 series
|
129.90 | |
| WP-36955 | Feeder
Crank assembly 350/360/375
|
129.90 | |
| WP-36307 | NEW STYLE (pump) switch with tab connectors 3 positions for AB Dick | 21.00 | |
| WP-362940 | Micro switch for chain delivery safety guards for AB Dick | 45.90 | |
| WP-36952 | Counter
For AB Dick
|
122.90 | |
| WP-36087 | Feeder
clamp For AB Dick
|
28.90 | |
| WP-1539 | Thumb
screw for clamp above For AB Dick
|
12.90 | |
| WP-36087K | Thumb
screw and clamp For AB Dick
|
40.90 | |
| WP-36597 | For
AB Dick Complete Clutch assembly with center hub inside diameter
1/2"
|
332.90 | |
| WP-98597 | For
AB Dick Complete Clutch assembly with center hub inside diameter
7/8"
|
362.90 | |
| WP-36605 | Lever
for clutch
|
66.90 | |
| WP-36591 | Clutch
spring For AB Dick
|
12.95 | |
| WP-36591-6 | Clutch
spring For AB Dick 6
pack
|
69.90 | |
| WP-1182 | Vacuum pump repair kit For AB Dick | 99.80 | |
| WP-1148 | Filter for vacuum pump For AB Dick | 1.00 | |
| WP-98037 | Cradle
repair kit 9800
|
99.90 | |
| WP-36157 | Feed roller 350/360/8805 For AB Dick | 99.90 | |
| WP-37157 | Feed roller 375 /9800 For AB Dick | 155.90 | |
| WP-38157 | Feed roller 385 For AB Dick | 214.90 | |
| WP-1915 | Water
bottle For AB Dick
|
21.90 | |
| WP-1549 | Hose for water fountain tray For AB Dick | 3.75 | |
| WP-5088 | Hardware
kit 437 pcs. springs/screw/nuts/c-rings/pins/ For AB Dick
|
126.00 | |
| WP-1707 | Master Hardware kit 720 pcs. springs/screw/nuts/c-rings/pins/ For AB Dick | 262.90 | |
| WP-984289 | Spring
arm assembly with roller for 1 to 1 chain delivery safety guard operator
side complete For AB Dick 9800 series
|
33.90 | |
| WP-984279 | Spring
arm assembly with roller for 1 to 1 chain delivery safety guard non
operator side complete For AB Dick 9800 series
|
33.90 | |
| WP-983130 | Tape for star wheel for 1 to 1 chain delivery For AB Dick 9800 series | 1.90 | |
| WP-36252 | Standard Blanket bars For AB Dick 360 | 159.90 | |
| WP-37252 | Standard Blanket bars For AB Dick 9800 | 179.90 | |
| WP-36204 | Long
mounting screw for blanket bars
|
2.70 | |
| WP-36376 | Shield
for Super Aquamatic fountain roller
|
2.50 | |
| WP-36262 | Ink
fountain roller seal for 360pro and 9800
|
7.90 | |
| WP-36500 | Ink ductor cam screw nut kit. We use bearing in place of cam for longer wear | 12.90 | |
| WP-36323 | Tail clamp 360/8805 | 142.90 | |
| WP-37323 | Tail clamp 375 | 142.90 | |
| WP-98323 | Tail clamp 9800 | 142.90 | |
| WP-1027 | Thumb
screw for above tail clamp
|
4.50 | |
| WP-36325 | Cone shaped spring for thumb screw above | 3.25 | |
| WP-36327 | Long side spring for tail clamps above | 3.30 | |
| WP-1956 |
Moffatt Press lamp with vented top and toggle switch.
|
120.00 | |
| P-4029 | SOLENOID
|
71.90 | |
| A-401969 | SOLENOID
|
151.77 | |
Use your computer to design the
work 
